Cold SAW model h350

350 mm ( 14" ) Saw Blade

HABERLE Model H 350:

HSS Saw Blade (14") 350 mm x 40 mm - For workshops and full-time production, cuts steel, stainless steel, nonferrous metals.

MODEL H350 Version A
Double-grip mechanical quick-action vise with clamp levers for quick movement to the left or right side of the saw blade. Optional second mechanical vise available if needed.

MODEL H350 Version B
Automatic double air vise system with cylinder stroke 8 mm (3/8"), pilot valve, front regulators and filter lubricator. Clamping is actuated when the saw head is moved from rest position by operator's handle. Necessary air supply: 6 bar (90 PSI).

Water coolant system with reliable high volume diaphragm coolant pump. Coolant supply to both sides of the saw blade. Removable 20 l (5 gal.) coolant reservoir, separate 20 l (5 gal.) swarf box. Quick release hose connection, fluid stop cock.

2-piece safety guard closes completely when the saw head is in rest position. Operator can not touch the saw blade. Double latch linkage for free guard movement when the head is lifted to effect the cut, outer guard remains between operator and saw blade. Quick release by spring button for easy saw blade replacement.

Oversized precision gear drive with elastic safety coupling, hardened and ground worm shaft, worm wheel of special bronze and 70 mm (2.75") dia. main spindle running in oil. Designed and built for full-time operation.

Saw blade H.S.S. max. 350x2.5x4O mm (14") with 2 drive holes 11 mm on circle 64 mm. Do not use segmental blades.

Saw blade speeds:
50 Hz:
Slow speed: 22/44 RPM also for stainless steel.
60 Hz:
Slow speed: 26.5/53 RPM also for stainless steel.
Double yoke pivot with hardened and ground shaft, adjustable on both sides.

Flat machine table with built-in precision swivel and clearly marked mitering scale. Vise remains stationary, saw head miters to any position within 45°. Positive locking by spring loaded pin at O° and 45°. Mitering table is clamped from top by clamp lever.

Jaw plates replaceable for profiled jaws. Standard rear plates movable close to the saw blade for safe cuts of thin work pieces. They reduce the cutting range for sections and structural by 12 mm (1/2").
 
Optional double-grip quick action vise
for burr-free straight cuts, recommended when cutting small parts. Adjustable right grip arm, vise screw with additional rear close-tolerance guide.

Optional second mechanical quick action vise recommended on machines of version A, allows burr-free straight and miter cuts.

Dimensions & weight:

Unpacked, without operator's handle:
660x920x1500 (WxLxH 26"x36"x58")
approx. 280 kg. (615 lbs.)

3-phase motors:
Standard 50 Hz: 2-speed 0.8/1.5 kW (1.1/2.0 HP)

Standard 60 Hz: 2-speed 0.95/1.8 kW (1.3/2.4 HP)

Main switch with overload protection and emergency stop device.

Version A: Double mechanical vise, opening 240 mm, with quick adjustment sleeve.
Version B: Double air vise system with valve, front regulators and filter-lubricator.
 
Optional fluid spray lubricator system for pure oil lubrication at extremely low oil consumption, with the Uni-MIST® dispenser No. 20.
Featuring:
• Adjustable positive injector pump
• Adjustable pulse generator
• Pressure less oil reservoir 0.5 l (16 oz.)
• Special nozzle, adjustable to the saw blade
• Separate oil and air supply to nozzle
• Separate volume control for air and oil
• Best equipment for vegetable oil
• Pilot valve for automatic operation
• Air pressure minimum 3 bar (45 PSI)
For standard machines: Model 20/A with electrical control valve and air filter-regulator.
For machines with air vise system: Model 20/13 with air control valve.

Length stops
Standard version: 1 Meter (40") un-graduated with quick release handles. Hinged 2-piece slider to touch any position of the work piece.

Graduated versions available upon request.

Down-feed speed restriction cylinder for safe operation and longer saw blade life on the hand-operated cold saw.
Featuring:
• Quick adjustment by clamp lever
• Soft touch of the saw blade to the material
• No hook-in cutting thin-walled work pieces
• Provable longer life of saw blade
• Precision cuts as on automatic machines
• Best for untrained operators
• With air vise system a safe equipment

Free movement of the saw head towards the work piece. Adjustable trailing block cares for soft touch, pulls the piston rod of the hydraulic cylinder when cutting through the work piece and pushes back the rod when lifting back the saw head into rest position.